|
|
|
|
Doll Type |
Head Circumference |
Measurement from eyebrow to nape of neck |
Pygmy |
8.7cm / 3.42" |
6cm |
PukiPuki |
9.4cm / 3.7" |
5cm |
Enoki |
10.6cm / 4.17" |
8cm |
Momonita |
11.9cm / 4.68" |
8.8cm |
Pukifee |
13.8cm / 5.43" |
10cm |
Tiny Delf |
14.3cm / 5.62" |
11cm |
Littlefee |
16.1cm / 6.33" |
11cm |
Unoa/MNF XS/Teenie Gem |
16.5cm / 6.49" |
12cm |
Momoni |
16.8cm / 6.61" |
13cm |
MNF S |
17.1cm / 6.73" |
12.5cm |
MNF M |
17.6cm / 6.92" |
13cm |
MNF L |
18.1cm / 7.12" |
13.5cm |
7.5" |
18.8cm / 7.40 |
13cm |
8" |
19.8cm 7.79" |
14.5cm |
8.25" |
20.9cm / 8.22" |
15cm |
8.5" |
21.5cm / 8.46" |
16cm |
8.75" |
22.2cm / 8.74" |
17cm |
9" |
22.7cm / 8.93" |
17cm |
9.5" |
24.3cm / 9.56" |
17.5cm |
Size |
Main Model to work from |
Test Model |
Test Model 2 |
8" |
9cm |
9cm |
10cm |
8.25" |
8cm |
- |
- |
8.5" |
10cm |
9.5cm |
10cm |
8.75" |
10.5cm |
10.5cm |
- |
9" |
10.5cm |
10cm |
10.5cm |
9.5" |
11.5cm |
11.5cm |
- |
Wigs from the K-pop series will require one more measurement check to see if your head will match up with our models. This measurement goes from ear to ear across the nose of the doll. Since these wigs are more tailored they have a set sideburn position and due to varying head sizes, this may not always align 100% of the time. Above is a table of measurements for the heads we have access to so we can test sideburn placement across a variety of sculpts. For the most part there is a little wiggle room but anything over 1cm difference is incompatible.. We can attempt to adjust the sideburn with measurements from you but there is a chance that it still won't fit correctly and we'd prefer not to do this if possible to avoid disappointment.
Above is a table of the models that we use to make wigs on.
There is about 0.5cm wiggle room in the circumference measurement so make sure you order in the size closest to your doll.
Wigs can be stretched with use of a hairdryer by heating up the inside of the wig on a low head and moulding it around the desired head.
In transit, wigs can often get a little tighter or looser depending on climate, so cool the wig to tighten and heat the wig to loosen.
There is about 0.5cm wiggle room in the circumference measurement so make sure you order in the size closest to your doll.
Wigs can be stretched with use of a hairdryer by heating up the inside of the wig on a low head and moulding it around the desired head.
In transit, wigs can often get a little tighter or looser depending on climate, so cool the wig to tighten and heat the wig to loosen.
The measurement from front to back is only required if you are requesting a short cut.
Most doll heads will fit these sizes but switch heads sometimes require extra length.
If you can let us know the measurements at checkout we can make sure that we add enough length at the back to accommodate the larger heads.
To accurately measure your dolls head, we suggest using a fabric tape measure. If you do not have a tape measure, you can also use a piece of thread or ribbon to wrap around the head, and then measure the length of that with a ruler.
Measure the circumference from high on the forehead, all the way around, making sure not to go under the bump at the back of the head.
Our wigs are made shorter at the back to make sure that they can fit a variety of head shapes and sizes.
Most doll heads will fit these sizes but switch heads sometimes require extra length.
If you can let us know the measurements at checkout we can make sure that we add enough length at the back to accommodate the larger heads.
To accurately measure your dolls head, we suggest using a fabric tape measure. If you do not have a tape measure, you can also use a piece of thread or ribbon to wrap around the head, and then measure the length of that with a ruler.
Measure the circumference from high on the forehead, all the way around, making sure not to go under the bump at the back of the head.
Our wigs are made shorter at the back to make sure that they can fit a variety of head shapes and sizes.
|
|
|
|
|
-Frappzilla Studio (E S T 2015)-
29960 SPAIN
29960 SPAIN